Big Air Precision
Pinty Striker Bullpup 22cal Magazine, Moderator Insert & Barrel Band



Pinty Striker 22cal Bullpup Magazine, Moderator Insert & Barrel Band...
Our Big Air Pinty Striker 22cal BULLPUP magazine was custom designed for the Beautiful dark wood stock Pinty 22cal Striker BullPup rifle. The Big Air Pinty Striker 22cal Bullpup mag is 9-shot so you'll get one more shot compared to the OEM mag plus our mag is way easier to load, smoother feeding and doesn't bend pellet skirts. The mag slides easily into the magwell and is held in place with a strong magnet. The Striker 22cal mag features last shot bolt hold-open and has a last shot indicator.

Our Big Air Pinty Striker Moderator Insert REPLACES THE OEM SHROUD BAFFLES AND AIR STRIPPER. The insert reduces the shot report ~6dB and pushes the air and lead dust out the muzzle instead of blowing back on you. It adds ~4 1/2" to the rifle length. It's easy to replace - with rifle in safe condition - by first removing the shroud, air stripper, baffles and front shroud cap. Thoroughly clean the shroud internal bore (Ballistol works great). Replace the shroud. Thread the moderator insert onto the barrel and tighten ONLY FINGER TIGHT! No need to over-tighten. You'll likely need to re-zero the rifle after you've installed the Moderator Insert. The Pinty Striker Moderator Insert is only to be used in the Pinty Bullpup (Thumper & Striker) rifle and is only rated for a max of 45fpe. DO NOT discharge the rifle without the shroud in place with the moderator installed. It nows comes with a metal threaded insert, WHICH FITS THE BARREL THREADS! THE MODERATOR INSERT DOES NOT THREAD ONTO THE MUZZLE ADAPTER!!

Our Big Air Pinty Bullpup low-profile Barrel Band helps to stabilize the barrel to the air tube and really helps improves accuracy. The barrel band is precisely engineered to snugly hold the barrel and help avoid POI shifts. It has soft rubber inserts to firmly grip the shroud/air tube and a brass insert and SS screw to easily tighten into position. It's easy to install - with rifle in safe condition - slide the barrel band down the barrel shroud/air tube and position ~1/4" above the "25Mpa Max Pressure" text. Gently tighten the Phillips screw until the halves meet. No need to over-tighten. You'll likely need to re-zero the rifle after you've installed the barrel band.

Check out our Big Air Pinty Bull-pup Accessories in action over on YouTube at Nib's Walnut & Steel channel!

Visit Nib's over on YouTube!



MADE IN THE USA!

Copyright 2024 - 2026 BigAirPrecision.com